Elektro-Automatik - UPS Informer Compact

Product Overview:

EA-UPS Informer Compact 1000 VA - 3000 VA
  • Line interactive principle
  • UPS classification VI-SS-222 according IEC 62040-3
  • Pure sine wave output for any critical load
  • Boost and buck converter with automatic voltage
  • Advanced intelligent battery management
  • Short recharge time for batteries
  • User friendly LCD panel
  • Soft start for critical loads
  • Short-circuit, overload and deep discharge protection
  • Fault alerts and status warnings
  • Output voltage displayed on the LCD panel
  • Cold start and energy saving features
  • Communication port with software
  • Compact size and user friendly operation

More

EA-UPS Informer Compact 1000 VA - 3000 VA

General The EA-INFC 1000-3000 series provide an uninterruptible power source for critical equipment to cover failures in the mains supply. The units can protect connected systems against power failure, undervolt- age and overvoltage.

Functional principle

The units work with the line interactive principle in the voltage independent category. The output voltage is stabilised and filtered by passing the input power through a converter with buck-and-boost switching. At the same time DC current is generated to charge the accumulators. In case of a power failure these accumulators provide power via the con- verter to the connected loads.

Protection functions

All models of the EA-UPS INFC 1000-3000 series have protection and filter functions.

The units are fused to protect both the unit and the user equipment against overload or short-circuit, and have an overload protection with automatic cut-off. During mains operation, the output is thus cut after 5 minutes if the output load is 100-110% or immediately at >110%. In battery operation, the cutoff already starts already after 5 seconds.

More Product Information

EA-UPS DSP Multipower 1 kVA - 10 kVA
  • Online double conversion principle
  • DSP microprocessor controlled
  • UPS classification VFI-SS-111 by IEC 62040-3
  • Pure sine wave output
  • Advanced intelligent battery management
  • Short-circuit, overload and deep discharge protection
  • Fault alerts and status warnings
  • Cold start and energy saving features
  • Communication port with software
  • Compact size and user friendly operation
  • Options & accessories
  • Additional charging unit
  • Various external battery cabinets for extended autonomy
  • Pluggable SNMP & dry contact boards
  • Three-phase AC supply input*

EA-UPS Guard LCD 2, 650 VA - 2000 VA
  • Line interactive principle
  • UPS classification VI-SY-333 by IEC 62040-3
  • Boost & buck converter with automatic voltage regulation
  • Intelligent battery management
  • User friendly LCD panel
  • Soft start for critical loads
  • Short-circuit, overload and deep discharge protection
  • Overvoltage / Undervoltage protection
  • Input and output voltage displayed on the LCD panel
  • Cold start and energy saving features
  • Communication port with software
  • Telephone / Fax / Modem protection
  • Can be used without batteries as AVR
  • Compact size and user friendly operation

EA Programmable DC Power Supplies

  • Autoranging
  • Color Touchscreen
  • IF- Plug’n play interface-slot

Space Saving Instruments in Desktop Style (Series PS and PSI)

  • Autoranging
  • Color Touchscreen
  • 3-paths on board Interface

Space Saving Instruments in Tower style

  • Autoranging
  • Colored Touchscreen
  • IF KE Slot
EA-UTA12
  • USB Digital-to-Analog conversion
  • Resolution: min. 12 Bit
  • Simple installation, USB plug ’n play
  • No external supply voltage required
  • For older EA series with analog interface
  • Also for power supplies from other manufacturers
  • Status signals monitorable
  • 2 channels each for control & measuring
  • Software included
  • LabView drivers (VIs)
  • Tutorial for programming in other PC languages

EA-PS 800 19“ 80 W - 240 W
  • Wide input voltage range 90...264 V with active PFC
  • High efficiency up to 92%
  • Output power ratings: 58 W up to 240 W
  • Output voltages: 3.3 V up to 24 V
  • Output currents: 2.5 A up to 30 A
  • Single, double or triple output
  • Power limited, all outputs for full power
  • All outputs separately adjustable and regulated
  • Overtemperature protection (OT)
  • Remote on/off and power fail signal
  • Remote sensing
  • Options
  • Power sharing* between mains outputs
  • Without front plate

19 Inch Slide-in Housing (Series EL / Dissipative)
  • Autoranging
  • Color Touchscreen
  • Master-Slave-Bus for Parallel Connection
  • Two-quadrant expansion
  • 19″ Full slide-in, 2 height units
  • Analog- und USB-Schnittstelle
19 Inch Slide-in Housing (Series ELR / Power generation)
  • Autoranging
  • Color Touchscreen
  • IF KE Slot
Space Saving Desktop Style Devices (Series EL)
  • Function generator
  • Portable desk device (Desktop Style)
  • Optional Interfaces
  • USB/Analog/LAN-Ethernet
Space-saving Tabletop Devices in Tower Style (Series EL)
  • AC wide input range 90-264V
  • Flexible input stage for range extension
  • Intuitive operation thanks to color TFT touch panel

EA-SPI 100-300 100W - 300W
  • Wide range input 85...264 V AC with active PFC
  • Wide range input 120...360 V DC
  • Inrush current limiter
  • Output powers: 100 W, 150 W, 200 W and 300 W
  • Output voltages:
    • 5 V, 7.5 V, 12 V, 13.5 V, 15 V, 24 V, 27.5 V, 48 V, 54 V
  • Output currents: 2.1 A up to 60 A
  • Output voltage adjustable ±10%
  • Overvoltage protection (OVP)
  • Overcurrent protection (OCP)
  • Overtemperature protection (OTP)
  • Extern on/off
  • Remote sensing
  • Cooling SPI 100 and SPI 150 natural convection
  • Cooling SPI 200 and SPI 300 with fan
  • EMI EN 61000-6-1, EN 61000-6-3

EA-PS 500 150 W - 300 W
  • Wide input voltage range 90...264 V with active PFC
  • Output powers: 150 W up to 300 W
  • Output voltages: 12 V, 24 V, 42 V and 48 V
  • Output currents: 5.2 A up to 21 A
  • Output voltage adjustable
  • Remote sensing input
  • Overload- and short-circuit-proof
  • Overtemperature protection (OT)
  • Desk and wall mounting versions
  • Desk units with 4 mm sockets (type T)
  • Wall units with screw terminals (type R)

EA-IF-AB

  • Retrofittable, simple installation (plug 'n play)
  • Easy configuration via a setup menu on the device
  • Galvanic isolation up to 2500 V

EA-IF-KE4

  • Retrofittable, simple installation (plug 'n play)
  • Easy configuration via a setup menu on the device
  • 3 way interface with
    • Ethernet (LAN)
    • USB
    • Analog
  • Compatible to series
    • EA-PSI 9000 T
    • EA-EL 9000 T
    • EA-PS 9000 T

EA-IF-KE5

  • Retrofittable, simple installtion (plug 'n play)
  • Easy configuration via a setup menu on the device 
  • Three choices to select from
    • IF-KE5 USB (1x USB)
    • IF-KE5 USB/LAN (1x USB + 1x Ethernet
    • IF-KE5 USB/ANALOG (1x USB + 1x Analog)
  • Compatible to series
    • EA-PS 3000 C
    • EA-EL 3000 B

Elektro-Automatik

The EA Elektro-Automatik Group is Europe’s leading supplier in the area of power electronics for R & D and industrial application. At the headquarter in Germany in the industrial centre of North Rhine Westphalia more than 200 qualified associates, in a facility of 18000 m², research, develop and manufacture high-tech equipment for laboratory power supply, high power mains adaptors and electronic loads with or without power feedback.

Contact Details

Corporate Headquarters

Helmholtzstraße 31-37, 41747 Viersen, Germany

Phone: +49 21 62/37 85 – 0

Fax:+49 21 62/16 230

Contact Form or Email: ea1974@elektroautomatik.com

Line Cards: