Elektro-Automatik - UPS Informer Compact
Product Overview:
-
Line interactive principle
-
UPS classification VI-SS-222 according IEC 62040-3
-
Pure sine wave output for any critical load
-
Boost and buck converter with automatic voltage
-
Advanced intelligent battery management
-
Short recharge time for batteries
-
User friendly LCD panel
-
Soft start for critical loads
-
Short-circuit, overload and deep discharge protection
-
Fault alerts and status warnings
-
Output voltage displayed on the LCD panel
-
Cold start and energy saving features
-
Communication port with software
-
Compact size and user friendly operation
More Product Information
-
Online double conversion principle
-
DSP microprocessor controlled
-
UPS classification VFI-SS-111 by IEC 62040-3
-
Pure sine wave output
-
Advanced intelligent battery management
-
Short-circuit, overload and deep discharge protection
-
Fault alerts and status warnings
-
Cold start and energy saving features
-
Communication port with software
-
Compact size and user friendly operation
-
Options & accessories
-
Additional charging unit
-
Various external battery cabinets for extended autonomy
-
Pluggable SNMP & dry contact boards
-
Three-phase AC supply input*
-
Line interactive principle
-
UPS classification VI-SY-333 by IEC 62040-3
-
Boost & buck converter with automatic voltage regulation
-
Intelligent battery management
-
User friendly LCD panel
-
Soft start for critical loads
-
Short-circuit, overload and deep discharge protection
-
Overvoltage / Undervoltage protection
-
Input and output voltage displayed on the LCD panel
-
Cold start and energy saving features
-
Communication port with software
-
Telephone / Fax / Modem protection
-
Can be used without batteries as AVR
-
Compact size and user friendly operation
EA Programmable DC Power Supplies
- Autoranging
- Color Touchscreen
- IF- Plug’n play interface-slot
Space Saving Instruments in Desktop Style (Series PS and PSI)
- Autoranging
- Color Touchscreen
- 3-paths on board Interface
Space Saving Instruments in Tower style
- Autoranging
- Colored Touchscreen
- IF KE Slot
-
USB Digital-to-Analog conversion
-
Resolution: min. 12 Bit
-
Simple installation, USB plug ’n play
-
No external supply voltage required
-
For older EA series with analog interface
-
Also for power supplies from other manufacturers
-
Status signals monitorable
-
2 channels each for control & measuring
-
Software included
-
LabView drivers (VIs)
-
Tutorial for programming in other PC languages
-
Wide input voltage range 90...264 V with active PFC
-
High efficiency up to 92%
-
Output power ratings: 58 W up to 240 W
-
Output voltages: 3.3 V up to 24 V
-
Output currents: 2.5 A up to 30 A
-
Single, double or triple output
-
Power limited, all outputs for full power
-
All outputs separately adjustable and regulated
-
Overtemperature protection (OT)
-
Remote on/off and power fail signal
-
Remote sensing
-
Options
-
Power sharing* between mains outputs
-
Without front plate
-
Autoranging
-
Color Touchscreen
-
Master-Slave-Bus for Parallel Connection
-
Two-quadrant expansion
-
19″ Full slide-in, 2 height units
-
Analog- und USB-Schnittstelle
-
Autoranging
-
Color Touchscreen
-
IF KE Slot
-
Function generator
-
Portable desk device (Desktop Style)
-
Optional Interfaces
-
USB/Analog/LAN-Ethernet
-
AC wide input range 90-264V
-
Flexible input stage for range extension
-
Intuitive operation thanks to color TFT touch panel
-
Wide range input 85...264 V AC with active PFC
-
Wide range input 120...360 V DC
-
Inrush current limiter
-
Output powers: 100 W, 150 W, 200 W and 300 W
-
Output voltages:
-
5 V, 7.5 V, 12 V, 13.5 V, 15 V, 24 V, 27.5 V, 48 V, 54 V
-
-
Output currents: 2.1 A up to 60 A
-
Output voltage adjustable ±10%
-
Overvoltage protection (OVP)
-
Overcurrent protection (OCP)
-
Overtemperature protection (OTP)
-
Extern on/off
-
Remote sensing
-
Cooling SPI 100 and SPI 150 natural convection
-
Cooling SPI 200 and SPI 300 with fan
-
EMI EN 61000-6-1, EN 61000-6-3
-
Wide input voltage range 90...264 V with active PFC
-
Output powers: 150 W up to 300 W
-
Output voltages: 12 V, 24 V, 42 V and 48 V
-
Output currents: 5.2 A up to 21 A
-
Output voltage adjustable
-
Remote sensing input
-
Overload- and short-circuit-proof
-
Overtemperature protection (OT)
-
Desk and wall mounting versions
-
Desk units with 4 mm sockets (type T)
-
Wall units with screw terminals (type R)
EA-IF-AB
- Retrofittable, simple installation (plug 'n play)
- Easy configuration via a setup menu on the device
- Galvanic isolation up to 2500 V
EA-IF-KE4
- Retrofittable, simple installation (plug 'n play)
- Easy configuration via a setup menu on the device
-
3 way interface with
- Ethernet (LAN)
- USB
- Analog
-
Compatible to series
- EA-PSI 9000 T
- EA-EL 9000 T
- EA-PS 9000 T
EA-IF-KE5
- Retrofittable, simple installtion (plug 'n play)
- Easy configuration via a setup menu on the device
-
Three choices to select from
- IF-KE5 USB (1x USB)
- IF-KE5 USB/LAN (1x USB + 1x Ethernet
- IF-KE5 USB/ANALOG (1x USB + 1x Analog)
-
Compatible to series
- EA-PS 3000 C
- EA-EL 3000 B
Elektro-Automatik
The EA Elektro-Automatik Group is Europe’s leading supplier in the area of power electronics for R & D and industrial application. At the headquarter in Germany in the industrial centre of North Rhine Westphalia more than 200 qualified associates, in a facility of 18000 m², research, develop and manufacture high-tech equipment for laboratory power supply, high power mains adaptors and electronic loads with or without power feedback.
Contact Details
Corporate Headquarters
Helmholtzstraße 31-37, 41747 Viersen, Germany
Phone: +49 21 62/37 85 – 0
Fax:+49 21 62/16 230
Contact Form or Email: ea1974@elektroautomatik.com