Products

Displaying 1 - 16 of 16

Product Type

Elektro-Automatik - Series PS 500 RT Built-in Power Supplies

Manufactured by: Elektro-Automatik

EA-PS 500 150 W - 300 W

Wide input voltage range 90...264 V with active PFC
Output powers: 150 W up to 300 W
Output voltages: 12 V, 24 V, 42 V and 48 V
Output currents: 5.2 A up to 21 A
Output voltage adjustable
Remote sensing input
Overload- and short-circuit-proof
Overtemperature protection (OT)
Desk and wall mounting versions
Desk units with 4 mm sockets (type T)
Wall units with screw terminals (type R)

Elektro-Automatik - 19“ 3U Eurocassette Power Supplies

Manufactured by: Elektro-Automatik

EA-PS 800 19“ 80 W - 240 W

Wide input voltage range 90...264 V with active PFC
High efficiency up to 92%
Output power ratings: 58 W up to 240 W
Output voltages: 3.3 V up to 24 V
Output currents: 2.5 A up to 30 A
Single, double or triple output
Power limited, all outputs for full power
All outputs separately adjustable and regulated
Overtemperature protection (OT)
Remote on/off and power fail signal
Remote sensing
Options
Power sharing* between mains outputs
Without front plate

Elektro-Automatik - Automatic Battery Chargers - Standard (lead)

Manufactured by: Elektro-Automatik

EA-BC 500 150 W - 300 W

Wide input voltage range 90...264 V with active PFC
Output powers: 150 W up to 300 W
Battery voltages: 12 V, 24 V or 48 V
Charging currents: 5.5 A up to 20.5 A
I-U-U charging characteristic
Short-circuit and reverse polarity protection
Overtemperature protection (OT)
Including adaptor for wall mount
Safety EN 60950

Elektro-Automatik - Digital Interface Cards for EL/ELR PS/PSI/PSE/PSB 9000 2U-3U

Manufactured by: Elektro-Automatik

EA-IF-AB

Retrofittable, simple installation (plug 'n play)
Easy configuration via a setup menu on the device
Galvanic isolation up to 2500 V

EA-IF-KE4

Retrofittable, simple installation (plug 'n play)
Easy configuration via a setup menu on the device
3 way interface with
- Ethernet (LAN)
- USB
- Analog
Compatible to series
- EA-PSI 9000 T
- EA-EL 9000 T
- EA-PS 9000 T

EA-IF-KE5

Retrofittable, simple installtion (plug 'n play)
Easy configuration via a setup menu on the device
Three choices to select from
- IF-KE5 USB (1x USB)
- IF-KE5 USB/LAN (1x USB + 1x Ethernet
- IF-KE5 USB/ANALOG (1x USB + 1x Analog)
Compatible to series
- EA-PS 3000 C
- EA-EL 3000 B

Elektro-Automatik - EA Programmable DC and Electronic Loads

Manufactured by: Elektro-Automatik

19 Inch Slide-in Housing (Series EL / Dissipative)

Autoranging
Color Touchscreen
Master-Slave-Bus for Parallel Connection
Two-quadrant expansion
19″ Full slide-in, 2 height units
Analog- und USB-Schnittstelle

19 Inch Slide-in Housing (Series ELR / Power generation)

Autoranging
Color Touchscreen
IF KE Slot

Space Saving Desktop Style Devices (Series EL)

Function generator
Portable desk device (Desktop Style)
Optional Interfaces
USB/Analog/LAN-Ethernet

Space-saving Tabletop Devices in Tower Style (Series EL)

AC wide input range 90-264V
Flexible input stage for range extension
Intuitive operation thanks to color TFT touch panel

Elektro-Automatik - EA-10000 Series DC Power Supplies and Electronic Loads

Manufactured by: Elektro-Automatik

Large product variety. Extended performance range. Powerful and efficient.

Over 180 DC power supplies and electronic loads: programmable, bidirectional, regenerative
Extended power ranges: From 600 W up to 30 kW programmable output power, from 6 A up to 1000 A output current, and from 10 V up to 2000 V output voltage
Energy recovery greater than 96 % eﬃciency
Safe parallel connection of up to 64 devices in the EA-Power Racks producing up to 1.92 MW
Eﬃcient applications test with true autoranging and integrated function generator
Easy handling with uniform devices and many interfaces to PCs and PLCs

Elektro-Automatik - Power supplies, variable and isolating transformers, AC DC

Manufactured by: Elektro-Automatik

EA-3000B

Designed for schools, universities and laboratories
Designed for industry and system applications
Designed for workshop and development
Adjustable insulated transformer
Output voltages: 0...30 V, 0...300 V or 0...32 V
Output currents: 0.5 A, 5 A or 0...5 A
Three-digit displays for voltage and current
Case closed on top and bottom
Safety output sockets
100% duty cycle
Safety EN 61010, EN 60950 and EMI EN 61326

EA-4000 B, EA-STT-2000

Designed for schools,university and laboratories
Designed for industry and system applications
Designed for workshop and development
Adjustable insulated transformer
Output voltages: 0...260 V AC und 0...32 V DC
Auxiliary output voltages:
3 V / 12 V / 18 V / 24 V / 230 V AC
Output currents: 2 A, 3 A, 4,5 A und 0...5 A
Three-digit displays for voltage and current
Case closed on top and bottom
Safety output sockets
100% duty cycle
Safety EN 61010, EN 60950 and EMI EN 61326

Elektro-Automatik - PS/PSI/PSE DC Power Supplies

Manufactured by: Elektro-Automatik

EA Programmable DC Power Supplies

Autoranging
Color Touchscreen
IF- Plug’n play interface-slot

Space Saving Instruments in Desktop Style (Series PS and PSI)

Autoranging
Color Touchscreen
3-paths on board Interface

Space Saving Instruments in Tower style

Autoranging
Colored Touchscreen
IF KE Slot

Elektro-Automatik - PSB Bidirectional Programmable DC Power Supplies

Manufactured by: Elektro-Automatik

Autoranging
Color Touch Screen
3-ways onboard interface
Master-Slave-Bus for parallel connection
19″ Full insertion
3 U or 4 U housing
Analog and USB interface, further options retrofittable
Microprocessor (FPGA) controlled
Color touch panel
Internal resistance control
Battery test mode
Arbitrary generator & car startup curve
Optional: Digital, pluggable interface modules
SCPI and ModBus protocol
LabView VIs and control software

Elektro-Automatik - Series PS 800 SM and PS 800 KSM Built-in Power Supplies

Manufactured by: Elektro-Automatik

EA-PS 800 KSM

Input voltage AC: 90...264 V
Input voltage DC: 120...370 V
Output power ratings: 10 W, 30 W, 60 W, 78 W, 100 W
Output voltages: 12 V and 24 V
Output currents: 0.42 A up to 6.5 A
Overload- and short-circuit-proof
Overtemperature protection
Overvoltage protection
Natural cooling
Protection degree IP20
Isolation class II
Safety EN 60950
EMC EN 61204 (EN 55022 class B)

EA-PS 800 SM 120 W - 480 W

Wide input voltage range 90...264 V with active PFC
High efficiency up to 93%
Output powers: 120 W up to 480 W
Output voltages: 12 V, 24 V and 48 V
Output currents: 10 A up to 20 A
50% overload for 8 seconds
DIN rail mounting
Overvoltage protection (OVP)
Overtemperature protection (OT)
Status indication via LEDs
Potential-free signal contact for output OK
Natural convection for cooling
Safety EN 60950
EMI EN 61000-6-1, EN 61000-6-3

Elektro-Automatik - SPI Series Built-in Power Supplies

Manufactured by: Elektro-Automatik

EA-SPI 100-300 100W - 300W

Wide range input 85...264 V AC with active PFC
Wide range input 120...360 V DC
Inrush current limiter
Output powers: 100 W, 150 W, 200 W and 300 W
Output voltages:
- 5 V, 7.5 V, 12 V, 13.5 V, 15 V, 24 V, 27.5 V, 48 V, 54 V
Output currents: 2.1 A up to 60 A
Output voltage adjustable ±10%
Overvoltage protection (OVP)
Overcurrent protection (OCP)
Overtemperature protection (OTP)
Extern on/off
Remote sensing
Cooling SPI 100 and SPI 150 natural convection
Cooling SPI 200 and SPI 300 with fan
EMI EN 61000-6-1, EN 61000-6-3

Elektro-Automatik - Turnkey DC Power Rack & Cabinet Systems

Manufactured by: Elektro-Automatik

EA’s flexible high-power DC supplies and electronic loads are integrated into 19 ” rack power supply or closed cabinet solutions and can be cost-effectively adapted to a wide variety of user requirements, thanks to their modular design and the standardized power and protection modules employed.

The 19 “rack power supply or cabinet system can be designed as pure DC sources, with power supplies, or as pure sinks, with electronic loads. Further still, the EA power supplies can be conventional or bidirectional, and the loads can be conventional or regenerative for a mixed of source and sink capability. High power density units can be easily paralleled up to 1.92MW in output, with up to 2000 VDC.

The DC rack power supply and electronic load series each feature 5 “TFT touch panel display for intuitive control, setup and programming. The intelligent interface allows you to program and test quickly without the need for extensive manual review.