Skip to: content

Elektro-Automatik - Automatic Battery Chargers - Standard (lead)

Manufactured by: Elektro-Automatik

Product Overview:

EA-BC 500 150 W - 300 W
  • Wide input voltage range 90...264 V with active PFC
  • Output powers: 150 W up to 300 W
  • Battery voltages: 12 V, 24 V or 48 V
  • Charging currents: 5.5 A up to 20.5 A
  • I-U-U charging characteristic
  • Short-circuit and reverse polarity protection
  • Overtemperature protection (OT)
  • Including adaptor for wall mount
  • Safety EN 60950

Manufactured by: Elektro-Automatik
More

EA-BC 500 150 W - 300 W

General

The automatic battery chargers of the series EA-BC 500 are suitable for charging lead acid batteries with a capacity up to 300 Ah. The units operate using the I-U-U characteristics. The empty battery is first charged in constant current mode until the rated voltage is reached. There follows a boost charge at constant voltage, limit- ed to one hour. Thereafter the charger switches to trickle charge. Three LEDs on the front are indicating the actual status of the charging mode.

Output

Different battery chargers for batteries with 12 V, 24 V or 48 V, charging currents from 5.5 A to 20.5 A and powers from 150 W to 300 W are avail- able. The battery chargers are protected against reverse battery polarity.

Scope of delivery

  • Mains cable
  • Battery cable with crocodile clips

13.8V / 11.0 A

Automatic Battery Charger

Product Type: DC Industrial Power Supply
Housing: Desktop (table)
Voltage (U): 12.00
Current (I) Ampere: 11.00
Power (P) Watt: 150.00
Resistance (R): No
Characteristic Curve:  
Human Interface:  
ext. control - analogue 0-5V/0-10V: No
external control - GPIB (IEEE488): No
external control - USB: No
external control - RS232: No
external control - CAN: No
external control - LAN: No
external control - Profibus: No
external control - DeviceNet: No
external control - Modbus TCP: No
function generator: No
special feature - High-Speed: No
special feature - Sink: No
special feature - water cooled: No

27.6V / 5.5 A

Automatic Battery Charger

Product Type: DC Industrial Power Supply
Housing: Desktop (table)
Voltage (U): 24.00
Current (I) Ampere: 6.00
Power (P) Watt: 150.00
Resistance (R): No
Characteristic Curve:  
Human Interface:  
ext. control - analogue 0-5V/0-10V: No
external control - GPIB (IEEE488): No
external control - USB: No
external control - RS232: No
external control - CAN: No
external control - LAN: No
external control - Profibus: No
external control - DeviceNet: No
external control - Modbus TCP: No
function generator: No
special feature - High-Speed: No
special feature - Sink: No
special feature - water cooled: No

13.8V / 20.5 A

Automatic Battery Charger

Product Type: DC Industrial Power Supply
Housing: Desktop (table)
Voltage (U): 12.00
Current (I) Ampere: 21.00
Power (P) Watt: 300.00
Resistance (R): No
Characteristic Curve:  
Human Interface:  
ext. control - analogue 0-5V/0-10V: No
external control - GPIB (IEEE488): No
external control - USB: No
external control - RS232: No
external control - CAN: No
external control - LAN: No
external control - Profibus: No
external control - DeviceNet: No
external control - Modbus TCP: No
function generator: No
special feature - High-Speed: No
special feature - Sink: No
special feature - water cooled: No

27.6V / 11.0 A

Automatic Battery Charger

Product Type: DC Industrial Power Supply
Housing: Desktop (table)
Voltage (U): 24.00
Current (I) Ampere: 11.00
Power (P) Watt: 300.00
Resistance (R): No
Characteristic Curve:  
Human Interface:  
ext. control - analogue 0-5V/0-10V: No
external control - GPIB (IEEE488): No
external control - USB: No
external control - RS232: No
external control - CAN: No
external control - LAN: No
external control - Profibus: No
external control - DeviceNet: No
external control - Modbus TCP: No
function generator: No
special feature - High-Speed: No
special feature - Sink: No
special feature - water cooled: No

41.4V/42.6V/6.4 A

Automatic Battery Charger

Product Type: DC Industrial Power Supply
Housing: Desktop (table)
Voltage (U): 42.00
Current (I) Ampere: 6.00
Power (P) Watt: 300.00
Resistance (R): No
Characteristic Curve:  
Human Interface:  
ext. control - analogue 0-5V/0-10V: No
external control - GPIB (IEEE488): No
external control - USB: No
external control - RS232: No
external control - CAN: No
external control - LAN: No
external control - Profibus: No
external control - DeviceNet: No
external control - Modbus TCP: No
function generator: No
special feature - High-Speed: No
special feature - Sink: No
special feature - water cooled: No

54.0V / 5.5 A

Automatic Battery Charger

Product Type: DC Industrial Power Supply
Housing: Desktop (table)
Voltage (U): 48.00
Current (I) Ampere: 6.00
Power (P) Watt: 300.00
Resistance (R): No
Characteristic Curve:  
Human Interface:  
ext. control - analogue 0-5V/0-10V: No
external control - GPIB (IEEE488): No
external control - USB: No
external control - RS232: No
external control - CAN: No
external control - LAN: No
external control - Profibus: No
external control - DeviceNet: No
external control - Modbus TCP: No
function generator: No
special feature - High-Speed: No
special feature - Sink: No
special feature - water cooled: No

More Product Information

Elektro-Automatik - UPS DSP Multipower
EA-UPS DSP Multipower 1 kVA - 10 kVA
  • Online double conversion principle
  • DSP microprocessor controlled
  • UPS classification VFI-SS-111 by IEC 62040-3
  • Pure sine wave output
  • Advanced intelligent battery management
  • Short-circuit, overload and deep discharge protection
  • Fault alerts and status warnings
  • Cold start and energy saving features
  • Communication port with software
  • Compact size and user friendly operation
  • Options & accessories
  • Additional charging unit
  • Various external battery cabinets for extended autonomy
  • Pluggable SNMP & dry contact boards
  • Three-phase AC supply input*

Elektro-Automatik - UPS Informer Compact
EA-UPS Informer Compact 1000 VA - 3000 VA
  • Line interactive principle
  • UPS classification VI-SS-222 according IEC 62040-3
  • Pure sine wave output for any critical load
  • Boost and buck converter with automatic voltage
  • Advanced intelligent battery management
  • Short recharge time for batteries
  • User friendly LCD panel
  • Soft start for critical loads
  • Short-circuit, overload and deep discharge protection
  • Fault alerts and status warnings
  • Output voltage displayed on the LCD panel
  • Cold start and energy saving features
  • Communication port with software
  • Compact size and user friendly operation

Elektro-Automatik - UPS Guard LCD2
EA-UPS Guard LCD 2, 650 VA - 2000 VA
  • Line interactive principle
  • UPS classification VI-SY-333 by IEC 62040-3
  • Boost & buck converter with automatic voltage regulation
  • Intelligent battery management
  • User friendly LCD panel
  • Soft start for critical loads
  • Short-circuit, overload and deep discharge protection
  • Overvoltage / Undervoltage protection
  • Input and output voltage displayed on the LCD panel
  • Cold start and energy saving features
  • Communication port with software
  • Telephone / Fax / Modem protection
  • Can be used without batteries as AVR
  • Compact size and user friendly operation

Elektro-Automatik - PS/PSI/PSE DC Power Supplies

EA Programmable DC Power Supplies

  • Autoranging
  • Color Touchscreen
  • IF- Plug’n play interface-slot

Space Saving Instruments in Desktop Style (Series PS and PSI)

  • Autoranging
  • Color Touchscreen
  • 3-paths on board Interface

Space Saving Instruments in Tower style

  • Autoranging
  • Colored Touchscreen
  • IF KE Slot
Elektro-Automatik - USB to Analog UTA12 Interface
EA-UTA12
  • USB Digital-to-Analog conversion
  • Resolution: min. 12 Bit
  • Simple installation, USB plug ’n play
  • No external supply voltage required
  • For older EA series with analog interface
  • Also for power supplies from other manufacturers
  • Status signals monitorable
  • 2 channels each for control & measuring
  • Software included
  • LabView drivers (VIs)
  • Tutorial for programming in other PC languages

Elektro-Automatik - 19“ 3U Eurocassette Power Supplies
EA-PS 800 19“ 80 W - 240 W
  • Wide input voltage range 90...264 V with active PFC
  • High efficiency up to 92%
  • Output power ratings: 58 W up to 240 W
  • Output voltages: 3.3 V up to 24 V
  • Output currents: 2.5 A up to 30 A
  • Single, double or triple output
  • Power limited, all outputs for full power
  • All outputs separately adjustable and regulated
  • Overtemperature protection (OT)
  • Remote on/off and power fail signal
  • Remote sensing
  • Options
  • Power sharing* between mains outputs
  • Without front plate

Elektro-Automatik - EA Programmable DC and Electronic Loads
19 Inch Slide-in Housing (Series EL / Dissipative)
  • Autoranging
  • Color Touchscreen
  • Master-Slave-Bus for Parallel Connection
  • Two-quadrant expansion
  • 19″ Full slide-in, 2 height units
  • Analog- und USB-Schnittstelle
19 Inch Slide-in Housing (Series ELR / Power generation)
  • Autoranging
  • Color Touchscreen
  • IF KE Slot
Space Saving Desktop Style Devices (Series EL)
  • Function generator
  • Portable desk device (Desktop Style)
  • Optional Interfaces
  • USB/Analog/LAN-Ethernet
Space-saving Tabletop Devices in Tower Style (Series EL)
  • AC wide input range 90-264V
  • Flexible input stage for range extension
  • Intuitive operation thanks to color TFT touch panel

Elektro-Automatik - SPI Series Built-in Power Supplies
EA-SPI 100-300 100W - 300W
  • Wide range input 85...264 V AC with active PFC
  • Wide range input 120...360 V DC
  • Inrush current limiter
  • Output powers: 100 W, 150 W, 200 W and 300 W
  • Output voltages:
    • 5 V, 7.5 V, 12 V, 13.5 V, 15 V, 24 V, 27.5 V, 48 V, 54 V
  • Output currents: 2.1 A up to 60 A
  • Output voltage adjustable ±10%
  • Overvoltage protection (OVP)
  • Overcurrent protection (OCP)
  • Overtemperature protection (OTP)
  • Extern on/off
  • Remote sensing
  • Cooling SPI 100 and SPI 150 natural convection
  • Cooling SPI 200 and SPI 300 with fan
  • EMI EN 61000-6-1, EN 61000-6-3

Elektro-Automatik - Series PS 500 RT Built-in Power Supplies
EA-PS 500 150 W - 300 W
  • Wide input voltage range 90...264 V with active PFC
  • Output powers: 150 W up to 300 W
  • Output voltages: 12 V, 24 V, 42 V and 48 V
  • Output currents: 5.2 A up to 21 A
  • Output voltage adjustable
  • Remote sensing input
  • Overload- and short-circuit-proof
  • Overtemperature protection (OT)
  • Desk and wall mounting versions
  • Desk units with 4 mm sockets (type T)
  • Wall units with screw terminals (type R)

Elektro-Automatik

https://elektroautomatik.com/en/

The EA Elektro-Automatik Group is Europe’s leading supplier in the area of power electronics for R & D and industrial application. At the headquarter in Germany in the industrial centre of North Rhine Westphalia more than 200 qualified associates, in a facility of 18000 m², research, develop and manufacture high-tech equipment for laboratory power supply, high power mains adaptors and electronic loads with or without power feedback.

Contact Details

Corporate Headquarters

Helmholtzstraße 31-37, 41747 Viersen, Germany

Phone: +49 21 62/37 85 – 0

Fax:+49 21 62/16 230

Contact Form or Email: ea1974@elektroautomatik.com

Line Cards: 
Test & Measurement