Elektro-Automatik - Series PS 800 SM and PS 800 KSM Built-in Power Supplies

Product Overview:

EA-PS 800 KSM
  • Input voltage AC: 90...264 V
  • Input voltage DC: 120...370 V
  • Output power ratings: 10 W, 30 W, 60 W, 78 W, 100 W
  • Output voltages: 12 V and 24 V
  • Output currents: 0.42 A up to 6.5 A
  • Overload- and short-circuit-proof
  • Overtemperature protection
  • Overvoltage protection
  • Natural cooling
  • Protection degree IP20
  • Isolation class II
  • Safety EN 60950
  • EMC EN 61204 (EN 55022 class B)
EA-PS 800 SM 120 W - 480 W
  • Wide input voltage range 90...264 V with active PFC
  • High efficiency up to 93%
  • Output powers: 120 W up to 480 W
  • Output voltages: 12 V, 24 V and 48 V
  • Output currents: 10 A up to 20 A
  • 50% overload for 8 seconds
  • DIN rail mounting
  • Overvoltage protection (OVP)
  • Overtemperature protection (OT)
  • Status indication via LEDs
  • Potential-free signal contact for output OK
  • Natural convection for cooling
  • Safety EN 60950
  • EMI EN 61000-6-1, EN 61000-6-3
More

EA-PS 800 KSM 10 W - 100 W

These switching mode power supplies are designed for DIN rail mounting on DIN TS35/7.5 or DIN TS35/15 rails. They are housed in a rugged plastic case with protection degree IP20.

All models have a wide input range for 90 V to 264 V AC or 120 V to 370 V DC for worldwide usage without the need of selecting the input. The units are protected against short-circuit, overload, overtemperature and overvoltage.

The output is isolated against the mains supply (floating potential). The output voltage is adjustable within 12...15 V DC or 24...28 V DC. The units are provided with output current limiting to 110%-130% (overload) or 150% (short-circuit).

A derating of 2.5%/°C for temperatures of >55 °C up to 70 °C is required.

EA-PS 800 SM 120 W - 480 W

This generation of DIN-Rail mounting power supplies series EA-PS 800 SM has been developed for heavy-duty industrial applications. An outstand- ing efficiency up to 93%, smallest dimensions are a result of the use of an innovative switching technology. The units have a power factor correction (PFC) of >99%.

They are able to supply an additional peak power of 50 % of the nominal rating for up to 8 seconds. The hold-up time upon mains power failure is >20 ms.

The output voltage can be adjusted via trimmer on the front panel. All models have a dry relay contact (DC power fail) to monitor the output voltage and they have two status LED’s for output and error.

EA-PS 824-004 KSM

Ue:90-264VAC

Power Supply 24-28V / 0,42A

Product Type: DC Industrial Power Supply
Housing: Wallmount
Voltage (U): 24.00
Current (I) Ampere: 0.42
Power (P) Watt: 10.00
Resistance (R): No
Characteristic Curve: U/I conventional
Human Interface: None
ext. control - analogue 0-5V/0-10V: No
external control - GPIB (IEEE488): No
external control - USB: No
external control - RS232: No
external control - CAN: No
external control - LAN: No
external control - Profibus: No
external control - DeviceNet: No
external control - Modbus TCP: No
function generator: No
special feature - High-Speed: No
special feature - Sink: No
special feature - water cooled: No

EA-PS 824-012 KSM

Ue:90-264VAC

Power Supply 24-28V / 1,25A

Product Type: DC Industrial Power Supply
Housing: Wallmount
Voltage (U): 24.00
Current (I) Ampere: 1.25
Power (P) Watt: 30.00
Resistance (R): No
Characteristic Curve: U/I conventional
Human Interface: None
ext. control - analogue 0-5V/0-10V: No
external control - GPIB (IEEE488): No
external control - USB: No
external control - RS232: No
external control - CAN: No
external control - LAN: No
external control - Profibus: No
external control - DeviceNet: No
external control - Modbus TCP: No
function generator: No
special feature - High-Speed: No
special feature - Sink: No
special feature - water cooled: No

EA-PS 824-025 KSM

Ue:90-264VAC

Power Supply 24-28V / 2,5A

Product Type: DC Industrial Power Supply
Housing: Wallmount
Voltage (U): 24.00
Current (I) Ampere: 2.50
Power (P) Watt: 60.00
Resistance (R): No
Characteristic Curve: U/I conventional
Human Interface: None
ext. control - analogue 0-5V/0-10V: No
external control - GPIB (IEEE488): No
external control - USB: No
external control - RS232: No
external control - CAN: No
external control - LAN: No
external control - Profibus: No
external control - DeviceNet: No
external control - Modbus TCP: No
function generator: No
special feature - High-Speed: No
special feature - Sink: No
special feature - water cooled: No

EA-PS 824-040 KSM

Ue:90-264VAC

Power Supply 24-28V / 4,2A

Product Type: DC Industrial Power Supply
Housing: Wallmount
Voltage (U): 24.00
Current (I) Ampere: 4.20
Power (P) Watt: 100.00
Resistance (R): No
Characteristic Curve: U/I conventional
Human Interface: None
ext. control - analogue 0-5V/0-10V: No
external control - GPIB (IEEE488): No
external control - USB: No
external control - RS232: No
external control - CAN: No
external control - LAN: No
external control - Profibus: No
external control - DeviceNet: No
external control - Modbus TCP: No
function generator: No
special feature - High-Speed: No
special feature - Sink: No
special feature - water cooled: No

EA-PS 812-010 KSM

Ue:90-264VAC

Power Supply 12-15V / 0,83A

Product Type: DC Industrial Power Supply
Housing: Wallmount
Voltage (U): 12.00
Current (I) Ampere: 0.83
Power (P) Watt: 10.00
Resistance (R): No
Characteristic Curve: U/I conventional
Human Interface: None
ext. control - analogue 0-5V/0-10V: No
external control - GPIB (IEEE488): No
external control - USB: No
external control - RS232: No
external control - CAN: No
external control - LAN: No
external control - Profibus: No
external control - DeviceNet: No
external control - Modbus TCP: No
function generator: No
special feature - High-Speed: No
special feature - Sink: No
special feature - water cooled: No

EA-PS 812-022 KSM

Ue:90-264VAC

Power Supply 12-15V / 2,5A

Product Type: DC Industrial Power Supply
Housing: Wallmount
Voltage (U): 12.00
Current (I) Ampere: 2.50
Power (P) Watt: 30.00
Resistance (R): No
Characteristic Curve: U/I conventional
Human Interface: None
ext. control - analogue 0-5V/0-10V: No
external control - GPIB (IEEE488): No
external control - USB: No
external control - RS232: No
external control - CAN: No
external control - LAN: No
external control - Profibus: No
external control - DeviceNet: No
external control - Modbus TCP: No
function generator: No
special feature - High-Speed: No
special feature - Sink: No
special feature - water cooled: No

EA-PS 812-045 KSM

Ue:90-264VAC

Power Supply 12-15V / 5A

Product Type: DC Industrial Power Supply
Housing: Wallmount
Voltage (U): 12.00
Current (I) Ampere: 5.00
Power (P) Watt: 60.00
Resistance (R): No
Characteristic Curve: U/I conventional
Human Interface: None
ext. control - analogue 0-5V/0-10V: No
external control - GPIB (IEEE488): No
external control - USB: No
external control - RS232: No
external control - CAN: No
external control - LAN: No
external control - Profibus: No
external control - DeviceNet: No
external control - Modbus TCP: No
function generator: No
special feature - High-Speed: No
special feature - Sink: No
special feature - water cooled: No

EA-PS 812-070 KSM

Ue:90-264VAC

Power Supply 12-15V / 6,5A

Product Type: DC Industrial Power Supply
Housing: Wallmount
Voltage (U): 12.00
Current (I) Ampere: 6.50
Power (P) Watt: 78.00
Resistance (R): No
Characteristic Curve: U/I conventional
Human Interface: None
ext. control - analogue 0-5V/0-10V: No
external control - GPIB (IEEE488): No
external control - USB: No
external control - RS232: No
external control - CAN: No
external control - LAN: No
external control - Profibus: No
external control - DeviceNet: No
external control - Modbus TCP: No
function generator: No
special feature - High-Speed: No
special feature - Sink: No
special feature - water cooled: No

EA-PS 812-16 SM Ue 100-240 VAC

Top hat rail power supply 12-15V / 16 A

Product Type: DC Industrial Power Supply
Housing: Wallmount
Voltage (U): 12.00
Current (I) Ampere: 16.00
Power (P) Watt: 240.00
Resistance (R): No
Characteristic Curve: U/I conventional
Human Interface: None
ext. control - analogue 0-5V/0-10V: No
external control - GPIB (IEEE488): No
external control - USB: No
external control - RS232: No
external control - CAN: No
external control - LAN: No
external control - Profibus: No
external control - DeviceNet: No
external control - Modbus TCP: No
function generator: No
special feature - High-Speed: No
special feature - Sink: No
special feature - water cooled: No

EA-PS 824-10 SM Ue 100-240 VAC

Top hat rail power supply 24-28V / 10 A

Product Type: DC Industrial Power Supply
Housing: Wallmount
Voltage (U): 24.00
Current (I) Ampere: 10.00
Power (P) Watt: 240.00
Resistance (R): No
Characteristic Curve: U/I conventional
Human Interface: None
ext. control - analogue 0-5V/0-10V: No
external control - GPIB (IEEE488): No
external control - USB: No
external control - RS232: No
external control - CAN: No
external control - LAN: No
external control - Profibus: No
external control - DeviceNet: No
external control - Modbus TCP: No
function generator: No
special feature - High-Speed: No
special feature - Sink: No
special feature - water cooled: No

EA-PS 824-20 SM Ue 100-240 VAC

Top hat rail power supply 24-28V / 20 A

Product Type: DC Industrial Power Supply
Housing: Wallmount
Voltage (U): 24.00
Current (I) Ampere: 20.00
Power (P) Watt: 240.00
Resistance (R): No
Characteristic Curve: U/I conventional
Human Interface: None
ext. control - analogue 0-5V/0-10V: No
external control - GPIB (IEEE488): No
external control - USB: No
external control - RS232: No
external control - CAN: No
external control - LAN: No
external control - Profibus: No
external control - DeviceNet: No
external control - Modbus TCP: No
function generator: No
special feature - High-Speed: No
special feature - Sink: No
special feature - water cooled: No

EA-PS 848-10 SM Ue 100-240 VAC

Top hat rail power supply 48-56V / 10 A

Product Type: DC Industrial Power Supply
Housing: Wallmount
Voltage (U): 48.00
Current (I) Ampere: 10.00
Power (P) Watt: 240.00
Resistance (R): No
Characteristic Curve: U/I conventional
Human Interface: None
ext. control - analogue 0-5V/0-10V: No
external control - GPIB (IEEE488): No
external control - USB: No
external control - RS232: No
external control - CAN: No
external control - LAN: No
external control - Profibus: No
external control - DeviceNet: No
external control - Modbus TCP: No
function generator: No
special feature - High-Speed: No
special feature - Sink: No
special feature - water cooled: No

More Product Information

EA-SPI 100-300 100W - 300W
  • Wide range input 85...264 V AC with active PFC
  • Wide range input 120...360 V DC
  • Inrush current limiter
  • Output powers: 100 W, 150 W, 200 W and 300 W
  • Output voltages:
    • 5 V, 7.5 V, 12 V, 13.5 V, 15 V, 24 V, 27.5 V, 48 V, 54 V
  • Output currents: 2.1 A up to 60 A
  • Output voltage adjustable ±10%
  • Overvoltage protection (OVP)
  • Overcurrent protection (OCP)
  • Overtemperature protection (OTP)
  • Extern on/off
  • Remote sensing
  • Cooling SPI 100 and SPI 150 natural convection
  • Cooling SPI 200 and SPI 300 with fan
  • EMI EN 61000-6-1, EN 61000-6-3

EA-PS 500 150 W - 300 W
  • Wide input voltage range 90...264 V with active PFC
  • Output powers: 150 W up to 300 W
  • Output voltages: 12 V, 24 V, 42 V and 48 V
  • Output currents: 5.2 A up to 21 A
  • Output voltage adjustable
  • Remote sensing input
  • Overload- and short-circuit-proof
  • Overtemperature protection (OT)
  • Desk and wall mounting versions
  • Desk units with 4 mm sockets (type T)
  • Wall units with screw terminals (type R)

Large product variety. Extended performance range. Powerful and efficient.
  • Over 180 DC power supplies and electronic loads: programmable, bidirectional, regenerative
  • Extended power ranges: From 600 W up to 30 kW programmable output power, from 6 A up to 1000 A output current, and from 10 V up to 2000 V output voltage
  • Energy recovery greater than 96 % efficiency
  • Safe parallel connection of up to 64 devices in the EA-Power Racks producing up to 1.92 MW
  • Efficient applications test with true autoranging and integrated function generator
  • Easy handling with uniform devices and many interfaces to PCs and PLCs

EA Programmable DC Power Supplies

  • Autoranging
  • Color Touchscreen
  • IF- Plug’n play interface-slot

Space Saving Instruments in Desktop Style (Series PS and PSI)

  • Autoranging
  • Color Touchscreen
  • 3-paths on board Interface

Space Saving Instruments in Tower style

  • Autoranging
  • Colored Touchscreen
  • IF KE Slot
EA-PS 800 19“ 80 W - 240 W
  • Wide input voltage range 90...264 V with active PFC
  • High efficiency up to 92%
  • Output power ratings: 58 W up to 240 W
  • Output voltages: 3.3 V up to 24 V
  • Output currents: 2.5 A up to 30 A
  • Single, double or triple output
  • Power limited, all outputs for full power
  • All outputs separately adjustable and regulated
  • Overtemperature protection (OT)
  • Remote on/off and power fail signal
  • Remote sensing
  • Options
  • Power sharing* between mains outputs
  • Without front plate

  • Autoranging
  • Color Touch Screen
  • 3-ways onboard interface
  • Master-Slave-Bus for parallel connection
  • 19″ Full insertion
  • 3 U or 4 U housing
  • Analog and USB interface, further options retrofittable
  • Microprocessor (FPGA) controlled
  • Color touch panel
  • Internal resistance control
  • Battery test mode
  • Arbitrary generator & car startup curve
  • Optional: Digital, pluggable interface modules
  • SCPI and ModBus protocol
  • LabView VIs and control software

EA-3000B
  • Designed for schools, universities and laboratories
  • Designed for industry and system applications
  • Designed for workshop and development
  • Adjustable insulated transformer
  • Output voltages: 0...30 V, 0...300 V or 0...32 V
  • Output currents: 0.5 A, 5 A or 0...5 A
  • Three-digit displays for voltage and current
  • Case closed on top and bottom
  • Safety output sockets
  • 100% duty cycle
  • Safety EN 61010, EN 60950 and EMI EN 61326
EA-4000 B, EA-STT-2000
  • Designed for schools,university and laboratories
  • Designed for industry and system applications
  • Designed for workshop and development
  • Adjustable insulated transformer
  • Output voltages: 0...260 V AC und 0...32 V DC
  • Auxiliary output voltages:
  • 3 V / 12 V / 18 V / 24 V / 230 V AC
  • Output currents: 2 A, 3 A, 4,5 A und 0...5 A
  • Three-digit displays for voltage and current
  • Case closed on top and bottom
  • Safety output sockets
  • 100% duty cycle
  • Safety EN 61010, EN 60950 and EMI EN 61326

EA’s flexible high-power DC supplies and electronic loads are integrated into 19 ” rack power supply or closed cabinet solutions and can be cost-effectively adapted to a wide variety of user requirements, thanks to their modular design and the standardized power and protection modules employed.
The 19 “rack power supply or cabinet system can be designed as pure DC sources, with power supplies, or as pure sinks, with electronic loads. Further still, the EA power supplies can be conventional or bidirectional, and the loads can be conventional or regenerative for a mixed of source and sink capability. High power density units can be easily paralleled up to 1.92MW in output, with up to 2000 VDC.
The DC rack power supply and electronic load series each feature 5 “TFT touch panel display for intuitive control, setup and programming. The intelligent interface allows you to program and test quickly without the need for extensive manual review.

EA-UPS DSP Multipower 1 kVA - 10 kVA
  • Online double conversion principle
  • DSP microprocessor controlled
  • UPS classification VFI-SS-111 by IEC 62040-3
  • Pure sine wave output
  • Advanced intelligent battery management
  • Short-circuit, overload and deep discharge protection
  • Fault alerts and status warnings
  • Cold start and energy saving features
  • Communication port with software
  • Compact size and user friendly operation
  • Options & accessories
  • Additional charging unit
  • Various external battery cabinets for extended autonomy
  • Pluggable SNMP & dry contact boards
  • Three-phase AC supply input*

Elektro-Automatik

The EA Elektro-Automatik Group is Europe’s leading supplier in the area of power electronics for R & D and industrial application. At the headquarter in Germany in the industrial centre of North Rhine Westphalia more than 200 qualified associates, in a facility of 18000 m², research, develop and manufacture high-tech equipment for laboratory power supply, high power mains adaptors and electronic loads with or without power feedback.

Contact Details

Corporate Headquarters

Helmholtzstraße 31-37, 41747 Viersen, Germany

Phone: +49 21 62/37 85 – 0

Fax:+49 21 62/16 230

Contact Form or Email: ea1974@elektroautomatik.com

Line Cards: